Replace Old Heating and Air Unit With New Efficient HVAC System
HVAC System Materials and Planning
What Makes a Home Comfortable
Jeff Wilson replaced his HVAC system for the same reason most homeowners do: It broke.
Five years ago in the heat of summer, his air conditioner died and this was well before he embarked on an all-out Deep Energy Retrofit (DER) to green his 70-year-old Cape Cod. Still, he used this opportunity to upgrade the old, standard unit.
"We had to keep a little air conditioning on so we didn't have so much mold," Jeff says, describing a major pitfall of the home: high humidity that produced damaging condensation, causing woodwork deterioration and poor air quality.
Jeff got three bids for the HVAC project, ranging from $3,500 to trade the old HVAC unit for a comparable model to $12,000 for a state-of-the-art system. (These price estimates are from the time of installation in 2005.)
"We expected gas prices to go through the roof, which they did in 2008," Jeff says, weighing the options. "And we expected this new HVAC unit to last."
Choosing an HVAC Unit
The 26-year-old unit Jeff replaced was 80 percent efficient not bad for 1979 technology. But we've come a long way since then. The standard option Jeff considered as a replacement would basically restore the system to status quo for $3,500. But Jeff was looking for more.
The midrange unit was priced at $4,200 and would boost the furnace efficiency to 90 percent, with a 16-SEER air conditioner. The lower the Seasonal Energy Efficiency Rating (SEER), the more energy it takes to cool the home.
The high-end system would cost Jeff $5,800, but for that $2,300 more, he got more features and optimum, 97 percent efficiency. Because the Wilsons mainly used their air conditioning to defuse the thick humidity typical in southeast Ohio during summer, a variable-speed blower was worth the investment. This mechanism allows Jeff to set the humidity level on his thermostat. "Instead of cooling your house down to get humidity levels low, you can do a bit of dehumidifying [with the blower] to keep the temperatures lower," he explains.
Jeff could get this feature plus 7 percent more efficiency on the gas furnace.
"We were looking toward the future," he says of the price tag and, when comparing systems, the estimated five-year payback.
The choice was relatively easy for Jeff. He chose the highest-end unit and sized the HVAC system exactly to fit his home so no energy would be wasted. However, he did not figure in extra capacity to supply heat and air to the new home addition, which would come to fruition five years later. Because this addition is built using the latest green technology in new construction and solar panel energy he doesn't expect to need the extra power for this part of the house.
Immediately after installing the new HVAC, Jeff noticed energy bills that were about 20 percent lower. "That's pretty significant," he remarks, noting that as HVAC systems age they become less efficient. The old system was probably running at 50 percent efficiency by the time it was replaced in 2005.
When the HVAC system in Jeff Wilson's 70-year-old Cape Cod home broke five years ago, well before his Deep Energy Retrofit (DER) efforts, he used the opportunity to upgrade the old unit to a system that is 97 percent efficient. With other efficiency measures, including insulation and new windows, his energy bills will eventually be two-thirds less.
Jeff shopped around before settling on this Bryant air conditioner with a Seasonal Energy Efficiency Rating (SEER) of 16. (The higher the number, the more efficient the system.) This unit works in concert with the 97-percent-efficient furnace with the variable-speed blower that allows Jeff to set the humidity level on his thermostat. This feature reduces air conditioning usage.
When choosing a new air conditioner or furnace, Jeff offers this tip: Buy the best system you can afford now. That way, as technology evolves, your system will remain relevant and continue to provide energy savings well into the future.
Here, Jeff outlines the features and benefits of the Bryant HVAC system he chose for his home. Those include: an efficient, maintenance-free motor; variable-speed control to adjust air flow based on the season and manage humidity; an easy-to-replace filter; a pre-filter that captures airborne particles; and greater heat return to the home in winter for efficient air filtering.
Jeff's furnace capacity is perfectly sized for his home, which is important to maximize the efficiency of the system. "If the system kicks on and cools down the house in five minutes, that sounds like a good thing — but the compressor will burn out years before it is supposed to," he points out. Bigger is not better. Size the HVAC to the size of your home, he advises.
Updating Your System
Invest in the best. "This is a long-term decision; it's not an appliance like a microwave," Jeff says. "By buying the highest efficiency rating possible now, you hedge your bets against the high energy prices that will come later."
Size the system. It may sound like a good thing if an HVAC unit kicks on and cools down a house in five minutes. Not so. "If you put in a unit that's too big, you'll fry the compressor," Jeff says. Ask the HVAC professional to size the system just right for your home.
Crunch the numbers. Jeff asked three contractors for estimates and made an educated decision based on the cost benefits of each. Shop around before you settle on a system or a contractor.