Nikon Z7/ Z6 Camera LCD& TOP Screen ProtectorTempered Glass (2+2 pack)

Description

Features:
Compatible: Camera screen protector For
Nikon Z7 Z6  Mirrorless
Camera
perfectly. Edge to edge. Easy to install with a simple swipe.
HD Clear Anti-Bubble Film:The exclusive HD technology makes perfect visual feast. Made from high light transmission materials, with the light transmittance above 99%, color camouflage further making the screen display sharp to enhance the screen display effect.
9H Hardness:Camera Tempered Glass Screen Protector , Made of high hardness material, after tempered steel processing, the hardness of surface up to 9H, Scratch, Dust, Water, Oil, Fingerprints and Shock resist.
Perfectly designed for the
Nikon Z7 Z6 Mirrorless
Camera. The 0.3mm screen protector leaves the touching sensitivity unaffected, 6 layers of coatings and UV Protection, you will see your Camera with HD clarity.
Please note: This is only a Accessory ,Camera is not included
Package in
cludes
:
2X Tempered Glass Film for
Nikon Z7 Z6
LCD Screen
2X
Tempered Glass Film for
Nikon Z7 Z6 Screen
2X Wet Cleaning Paper
2X Dry Cleaning Paper
2X Dust-absorber
Thank you for purchasing this excellent screen protector. I will guide you through the installation and answer any questions by email,The process is divided into four steps:
1) cleaning your touch screen by using the green "1" (wet) and red "2" (dry) wipes. Touch ONLY the edges of the screen with your fingers since the oil from your fingers may cause problems.
2) remove dust from your touch screen with the blue "dust absorber" stickers. These are really sticky, and you should hold them only by the end or tab--not the middle. Use the straight stickers for the edges of your screen, and the round sticker for the main part of the screen.
3) (please see included diagram) separate the protective screen--the THICK screen, which will soon be applied to your touch screen--from the THIN protective layer. Hold on to the black tab and pull gently from one corner diagonally across to the opposite corner OR straight across if you're really good with your hands. Now you have the solid screen protector ready to apply. Again, handle the screen ONLY by its edges, and place it carefully on your clean touch screen. As you apply GENTLE pressure to the surface of your touch screen protector, you will see the screen turn from gray to black, showing that contact has been made.
4) Wipe gently , using a SOFT cloth (not paper towels, since they can scratch) from the center outward until your new screen protector is attached completely to your touch screen.
You now have protected your touch LCD screen from potential harm.Congratulations!